7435A REV H Norge Dryer Parts List

Search the entire 7435A REV H by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Dual action agitator (agitator asm multi)

This plastic dual action agitator is white in color. It is approximately eighteen inches tall with a base diameter of about 12-1/4 inches. The agitator pivots back and forth, moving the clothes from the top to the bottom of the tub, through the detergent and water to wash them. If the agitator becomes damaged or will not agitate, you may need to replace the part. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:: EAP1482519

Availability:: Special Order

Price:: $135.40

Push on nut (nut push on)

This push on nut is for your dishwasher or refrigerator. As the name suggests, it pushes into place, rather than being screwed in. It is approximately half an inch in diameter and is made of stainless steel.

Easy Part #:: EAP298353

Availability:: Special Order

Price:: $9.83

Door gasket (seal-door)

This door seal does not include the adhesive glue.

Easy Part #:: EAP11731610

Availability:: In Stock

Price:: $76.86

Agitator repair kit (cam, driven)

This agitator repair kit comes with a long cam, a thrust spacer and four dogs ears (agitator cogs). This repair kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover). This part has been updated by the manufacture.

Easy Part #:: EAP334622

Availability:: In Stock

Price:: $41.91

Thrust spacer (spacer, thrust)

This white thrust spacer is made of plastic and is also commonly referred to as a retainer ring. It is approximately 2 1/2-inch in diameter. The thrust spacer is used in the agitator assembly between the agitator and the auger. The thrust spacer supports the agitator auger as it moves. It is used in many direct drive washer machine models. If your washer will not agitate or is noisy, you may need to replace the thrust spacer. Please be sure to disconnect the power to your washer before starting your repair. You may need agitator grease for the repair. This is a genuine OEM part.

Easy Part #:: EAP334562

Availability:: In Stock

Price:: $7.03

D-shaped knob clip (clip knob)

This control knob clip helps secure the timer knob to the shaft allowing you to select the desired setting for your dryer. If the knob has become loose or the clip is missing you will need to replace the clip. This clip is a genuine OEM part, made of metal and is sold individually.

Easy Part #:: EAP268493

Availability:: Special Order

Price:: $9.83

Control knob and clip - white (control knob white assembly)

This knob and clip set is an OEM replacement part for your washer or dryer. The knob accepts a D-shaped shaft and is sold individually.

Easy Part #:: EAP9493075

Availability:: Special Order

Price:: $27.60

Heating element kit - 240v 4750w (sub la-1044)

This heating element assembly includes the high limit thermostat (L240-80F). The 240-volt 4750-watt, heating element produces heat for drying clothes inside your dryer. If your dryer takes too long to dry or has no heat, you should check for a blown thermal cut out or a thermal fuse. Some heating elements will often have a break in the coil element and will need to be replaced. The element measures approximately 10” L x 3.5” W and the thermostat measures 2” L x 1 1/2” W. Please remember to disconnect the power to the dryer before starting the repair. This is a genuine OEM part.

Easy Part #:: EAP2162280

Availability:: In Stock

Price:: $90.60

Screw

Sold individually.

Easy Part #:: EAP11742240

Availability:: In Stock

Price:: $15.22

Run capacitor (capacitor, run)

The run capacitor is attached to the compressor. This part is 220 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. If your refrigerator is too warm, will not start, or your freezer section is too warm, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:: EAP11743364

Availability:: In Stock

Price:: $76.64

Light bulb - 40w 130v (lamp - cavity)

This 40 watt, 130-volt clear appliance light bulb is for your microwave. The light bulb is used on the inside of your microwave to provide light when the door is open or below the microwave to provide light for the cooking area. It is clear in color and has a small screw-in base. If your current bulb is burnt out or broken you will need to replace it. This bulb is a genuine OEM part and is sold individually.

Easy Part #:: EAP247209

Availability:: Special Order

Price:: $25.27

Shelf retainer bar end cap (refrigerator door shelf rail end cap)

The door shelf retainer bar end cap helps keep the retainer shelf bar in place to hold items on the door shelves. The end cap can be used for the left or right side of the door. This door end cap is almost two inches long, white in color, made entirely of plastic, and sold individually. This is a genuine OEM part.

Easy Part #:: EAP11743131

Availability:: In Stock

Price:: $13.79

Vegetable pan cover frame - glass not included (cover veg pan)

This is the replacement vegetable pan cover for your refrigerator. It is made of white plastic and measures approximately 26 inches by 18 inches. This part is the frame of the pan only, and does not include the glass that forms the shelf. The vegetable pan lid is found at the top of the vegetable pan and acts as a frame for the pan. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Easy Part #:: EAP1019122

Availability:: Special Order

Price:: $149.53

Door catch kit

The door catch helps keep the door closed while the machine is running. If your dryer won’t start or the door won’t close you may need to replace the door catch. This is a genuine OEM part and includes both the male (strike) and female (catch) pieces. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:: EAP2162263

Availability:: In Stock

Price:: $37.15

Dryer radiant flame sensor (sensor)

This part senses if the igniter is hot enough to ignite the flame for heat, allowing the gas valve to open. The sensor is three inches long and is used for many gas clothes dryers. If your dryer is not creating any heat, taking too long to dry or shuts off too soon, you may need to replace the flame sensor. This is a genuine OEM part and is made of both plastic and metal. Please remember to disconnect power to your dryer before starting your repair.